Define- Our problems throughout this project were not too hard to find and fix. We struggled with our houses weight seeing as we had an array of wires pulling and weighing down our house at the back. We decided to fix this problem by 3D printing some weights to help hold down the front while testing. We also had an issue with our extra room (with one light) where the light blew out after we had finished all of our wiring, resulting in us having to redo the wiring and light setup.

Dream- We decided as a group that it would be best to move forward and fix the problem of the houses uneven weight by 3D printing some weights to help hold down the front while testing. To help try and solve the problem we had with the light in the extra room we decided that it would be best, so as to not waste any of our time, to have one person redo the circuit for that room while the other two members of the group move forward to move on to one of the harder parts of the project, the parallel circuit.

Deliver- To fully complete our ideas for our solutions we went ahead and printed the weights in the library, and they ended up working out perfectly, holding down the front end of the house perfectly.

(Photo of 3D printed weights and the light on the left working after circuit was changed.)

Debrief- Our final product worked very well and matched all the criteria needed. The only thing that could have been better was the fact that our wires all throughout the back of our project were very unorganized.  Everything was connected fine however we could have used straws to organize the wires more efficiently.