Part 1 – Tumble Glider
Explanation of Bernoulli’s Principle
When air is moving faster than the other air around it the faster moving air creates an area of low pressure which means the slower moving air is at a higher pressure. So if you have fast moving air flowing over top of an object and slow moving air flowing underneath the object the higher pressure from the slow moving air will push the object up because of the lower pressure created by the fast moving air on top.
Picture that Visualizes Bernoulli’s
Video of Test Flight
1. Draw a path of trajectory of your rocket
2. Which force is acting on the rocket at the moment of launch? (use arrows to indicate direction)
3. As the rocket was half-way up, which force(s) is/are acting on the rocket? (use arrows)
Still thrust plus some gravity
4. As the rocket begins to veer into another direction, which force is acting on the rocket? Explain why this is happening.
5. Did some rockets work better than others? How does the shape of the nose and fin effect the trajectory of the rocket? Explain in terms of the four forces that act on a rocket ship
There was multiple things that made the different rockets better than others some of the main things that positively affected the height and distance of the rocket was: a pointy tip, a balanced ship and a strong cylinder. The wider fins did create more lift but it also added more drag and gravity pull.
Part 3 Water Bottle Rockets
What have you learned about the history of rockets and space travel? Write a summary on the blog about something or someone you found interesting and tell why.
One of the first Rocket resembling items was an arrow with a propellant attached to it this gave the arrow extra longe range and was also usable without a bow. This item was made by the Chinese and there was an ancient Chinese legend about them that stated that one man strapped a whole bunch of the rocket arrows onto a chair with wings wich then flew threw the air. Kung Fu Panda ??????????
Now that you know about the basic parts of a rocket and what they do, write about each part and its importance in your own words. What will be different on your water rocket than on a “real” rocket and why?
Nose cone: splits the air to help the rocket pass threw mare smoothly my rockets nose cone won’t be as point or as large in comparison to body because the material I can use will not be strong enough to go that thin
Payload: the payload is the compartment that gets launched into space and is not needed for the operation of the rocket
Propulsion chamber: contains the engine, the part that gives the rocket it’s thrust. We will not be using the same fuel are as heavy duty and complex system
Fins: help keep the rocket on its intended path of flight. Adding fins also adds drag to the end of the rocket wich keeps the rocket flying straight.
Write a little on the blog about how to find the Center of Pressure and the Center of Gravity on your rocket and why they are important
To find the center of pressure you need to cut out a cardboard trace of your rocket and then balance it for example on the edge of the ruler. Your center of pressure is wherever the cardboard touches the ruler in order to make it balance.
This is the point where the wind pushes on your rocket
To find the center of gravity you tie a string around your rocket and wherever the rocket balances is your center of gravity.
This is the balancing point of your rocket
knowing this is important because your center of gravity has to be in front of your center of pressure in order for your rocket to fly straight
Based on what you have learned about rocket design (nose cone & fins) describe what your rocket will look like and why you chose that design on the blog.
tip: strong and pointy judging from paper rocket flights
fins: sturdy small equally spaced judging from paper rocket flights
Bottle rockets 🚀 review
1. How did the height you estimated your rocket would reach compare with the actual
2. What do you think might have caused any differences in the height you achieved?
My rocket did not go as high as I expected. I think the major thing slowing my rocket was the drag because the parachute was on top of the rocket and prevented the air from flowing over the rocket as smoothly as it might have been able to without the parachute.
3. Did your rocket launch straight up? If not, why do you think it veered off course?
my rocket did launch straight into the sky and then came straight back down.
4. Do you think that this activity was more rewarding to do alone? Would you have preferred to do it in groups? Why or why not?
I don’t really have a preference. This was a fun project anyhow.
5. Did you adjust your model rocket at all? How? Do you think this helped or hindered
I accidentally glued the wings on in the wrong direction to start which might have done some damage to them in the process of correcting that.
6. How do you think the rocket would have behaved differently if it were launched in a
it would’ve kept going.
7. What safety measures do you think engineers consider when launching a real rocket?
Consider the location of most launch sites as part of your answer.
They probably have days marked off for inspection on a real rocket to make sure every single piece will work perfectly because if it doesn’t that is a lot of money down the drain.
8. When engineers are designing a rocket which will carry people in addition to cargo, how
do you think the rocket will change in terms of structural design, functionality, and
they would have to anticipate the extra weight and room needed and created by the people and it also adds a lot more tension to make sure everything will work perfectly.
9. Do you think rocket designs will change a great deal over the next ten years? How?
I think they are definetly going to change because rockets are just starting to advance and their is lots we still can learn about rockets and space travel. I think that relatively this is an area that we don’t have much information on and will greatly change over the next couple of years.
10. What tradeoffs do engineers have to make when considering the space/weight of fuel
vs. the weight of cargo?
how much money they want to spend
how big they want to make it
how much space needed for cargo and fuel