In this unit you will learn about the internal combustion engine in depth through an interactive activity as well as the website content. We will discuss the history, terminology, components, processes, and more. Use the content on this page in order deepen your understanding of the engine and to interact with the activity to demonstrate your learning.
Upon completion of this unit you should be able to:
- Identify the components of an engine
- Understand the responsibility of each component
- Describe the process of power production
- Disassemble and reassemble an engine according to manufacture specification
This unit will be broken down into three components. In order to assess your understanding for this unit, you must complete the following:
- Interactive Engine Activity (5% of Assignments grade)
- The Engine Quiz Part 1 Theory (5% of Quizzes/Tests grade)
- The Engine Quiz Part 2 Lab (10% of Labs grade)
Total: 20% of final grade
Complete the interactive Engine Activity below before proceeding with quiz part 1 and part 2.
The 4 Stroke Cycle
Understanding the process and cycles of a 4 stroke engine are crucial in being able to understand an engine and it’s components. Power occurs through the 4 stroke process as follows:
Make sure you understand this cycle before proceeding to the quizzes and labs. The greater the understanding of this cycle the easier the disassembly and reassembly process will be!
Although the 4 stroke engine is the most common, there are other types of internal combustion engines.
4 stroke engine
2 stroke engine
Quiz part 1
You are now ready to complete unit #4 quiz part 1. Please email or print out to hand into the quiz. Click here for the link.
The Engine Quiz part 2 requires you to remove and rebuild an engine. However, there are some key steps to take before proceeding. Firstly, you want to CLEAN the engine. The cleaner the easier it is to work on.
- Use plastic bags to cover important electrical components
- Spray the engine with engine de-greaser
- Allow the soap to soak for 5 minutes
- Pressure wash the engine bay (wear safety glasses)
- Disconnect the battery
- Remove the hood
- Take photos of engine bay prior to disassembly
- Drain the oil and coolant
- Remove the radiator
- Label EVERYTHING
- Take photos of each component being removed
- Label and disconnect:
- Coolant hoses
- Electrical wires
- Vacuum hoses
- AC pump (not the lines)
- PS pump (not the lines)
- Remove intake manifolds
- Remove exhaust manifolds
- Unbolt the transmission
- Unbolt the motor mounts (support the engine with the crane when doing this)
- Remove anything else attached the the car
- Attach engine chain to engine
- Use engine crane to slowly lift the engine
- Ensure nothing else is attached to engine
- Slowly lift engine out of vehicle
- Rest engine on engine stand (do not leave hanging off crane)
The Engine Lab Part 1
Quiz part 2
You are now ready to complete The Engine Lab Part 2 You must print out the lab in order to complete and hand in.
The Engine Lab Part 2